DLE Engines DLE 61CC Gas RC Aircraft Engine for RC Plane Model with Electronic Ignition and Mufflers
The DLE Engine DLE 61cc gas engine weighs four pounds and cranks out over six horsepower from a durable and long-lasting engine. Extras like an airplane-specific carburetor, muffler, standoffs and electronic ignition boost performance even further.
1, Electronic ignition delivers smooth idle, easy starting and
powerful throttle transition, spiral wire wrap eliminates
2, Muffler designed for optimized power delivery
3, Enlarged crankshaft ball bearings
4, Two petal reed valve induction system
5, Airplane specific carburetor with manual choke
6, Lightweight piston for fast acceleration, excellent compression and
* Displacement: 3.7 cu in (61.0 cc)
* Bore: 1.85" (47mm)
* Stroke: 1.38" (35mm)
* Compression Ratio: 10.5:1
* Performance: 6 HP/7,500RPM
* Idle Speed: 1,400 RPM
* Overall Weight: 4 lbs (1814g)
* Engine Weight: 3.02lbs (1370g)
* Muffler Weight: 3.9oz (110g)
* Ignition Module Weight: 3.9oz (110g)
* Engine Mount Standoff Weight: 4.5oz (128g)
* Distance between top Horizontal Mounting Hole Centers: 3.54" (90mm)
* Distance between Vertical Mounting Hole Centers: 2.64" (67mm)
* Distance/bottom Horizontal Mounting Hole Centers: 2.83" (72mm)
* Height/Crankshaft center to top of Cylinder Head: 4.96" (126mm)
* Backplate to outer edge of Prop Drive Hub: 6.77" (172mm)
* Outer edge of Standoff to outer edge of Prop Drive Hub: 9.45" (240mm)
* Standoff Length: 2.68" (68mm)
* Spark Plug Gap: 0.018 - 0.020" (0.45mm - 0.51mm)
* Carburetor Settings; (carb is preset at factory and should require only small adjustments)
* Idle Adjustment Screw: Turn clockwise to increase idle speed, conterclockwise to decrease idle speed
* Low Speed Needle: Turn needle to fully closed position, then open
* High Speed Needle: Turn needle to fully closed position, then open
1.5 turns-tachometer is recommended when setting high speed
needle to obtain maximum speedINCLUDES
* DLE-61 Gasoline Engine with Electronic Ignition
* NGK CM6 Spark Plug
* Electronic Ignition
* four 2.7" (68mm) Standoffs
* Instruction Manual
1, 87 octane gasoline
2, 2-cycle oil, mix ratio for this engine is 30 parts gas to one part oil and must be followed exactly for warranty consideration and optimum performance
3, 4.8 - 6V NiMH/NiCd, or 6.6V LiFe or 7.4V LiPo battery for ignition (separate receiver style pack can be used)
NOTE : 1st version ignition is marked 'A-01' on the label and requires a regulator if using 2S LiPo/LiFe battery. If ignition module is the A-02 model it has a built-in voltage regulator. Model A-02 designation is located above the word "Ignition" on top of the case**
Propeller: 22x10, 23x8, 23x10, 24x10
Q1 : Do you ship worldwide?
A1 : Yes, we can ship worldwide.
Q2 : Where you ship goods from?
A2 : Our warehouse is located in China, the goods will be shipped from China mainland.
Q3 : What is the shipping cost?
A3 : For giving customer good shopping experience, we offer free international shipment.
Q4 : What is the shipping time?
A4 : For expected delivery date, please check in this page: Expected Delivery Time
Q5 : How do I track my package?
A5 : You can track your order on 17track.net . Or if you need a team members help check up please contact with our service team firstname.lastname@example.org and we will be in touch with a status update.
Questions about Payment & Order
Q1 : What payment terms you can accept?
A1 : For payment, we accept Paypal and Credit Card.
Q2 : My payment was declined, why? How to solve it ?
A2 : If you made the purchase via Credit Card and failed, could you please contact with Stripe Support Team for solution? Or if the issue can be solved, please no worry, we accept Paypal payment as well.
Q3 : How do I cancel my order?
A3 : For the order, if not shipped out yet, please contact with our Service Support Team email@example.com , we will cancel your order and give you full refund.
Q4 : Is my information is securing using this site?
A4 : Yes, Enginediy.com takes precautions to protect your personal information. When you submit sensitive information via the website, your information is protected both online and offline. Please don’t worry for this.
Q5 : What if my address is wrong?
A5 : If the recipient's address was wrong, after the failed delivery, the parcel should be returned back to sender. After we receive the parcel, we will contact you for an updated address and arrange the new shipment.
Questions about Return & Refunds
Q1 : What items are returnable?
A1 : a)- We can accept returns or exchanges within the 30-day period. b)- All returned items must be in the original condition: unused, unwashed, and unworn. No exceptions.
Q2 : How do I return a product?
A2: Contact with Enginediy Service Team firstname.lastname@example.org to confirm details to make sure the item is meet the return condition. After the agreement, Service Team will send the detailed return information, please offer return tracking number after return shipment .
Q3 : What is you refund policy?
A3 : Refunds are processed within 1-5 business days, after you received our confirmation on the cancellation.
Q4 : How will you refund me?
A4 : The refund are applied to the original payment method.
4 Cylinder Car Engine Assembly Model Gift for Collection This four-cylinder engine kit packed with a metal box. So people has to assemble the par...View full details
16 Cylinder Stirling Engine Model Kit Gas Powered Creative Motor Engine Toy - Upgraded to Two Fuel TankThis 16 cylinder Stirling engine is a heat...View full details
3D Puzzle DIY Model Kit Jigsaw Metal Scorpion King Mechanical Assembly Crafts-200PCS+More Details:Design Story: We have been figuring out how to m...View full details
HSP RC Car 1/10 Scale 4WD Nitro Gas Powered Monster Truck Vehicle1:10 Monster truck tires durable, better embodies the perfect off-road performance...View full details
TOYAN Engine 4 Stroke RC Model Engine Kit - Build Your Engine That Works Warm Tips:The TOYAN FS-S100 Engine now is off-production and the new one w...View full details