Outboard Motors, 4 Stroke 4Hp 55cc Air-cooled Boat Engine Outboard Boat Motor
Features:
1, High Performance: Four-stroke power, less noise, fuel saving. Started by hand, simple and convenient. With reverse function for operation flexibly.
2, Applicable Ship: 4hp outboard is suitable for small boats of various materials (such as inflatable boat, iron boat, plastic boat, glass fiber reinforced plastic boat, wooden boat, etc.).
3, The product comes with a funnel, kit, and cotter pin.
Engine Start Procedure:
(1) Insert the emergency flameout cable insert into the flameout switch slot.
(2) Insert the fuel inlet pipe inlet plug into the fuel tank socket.
(3) Insert the nozzle plug into the tubing socket on the base of the outboard.
(4) Unscrew the vent screw on the fuel tank cap counterclockwise.
(5) Squeeze the hand core pump by hand several times until the oil pump is full of fuel and feel the hand pump hard.
(6) Move the shift lever to the “Neutral” position.
(7) Turn the throttle lever to the “start” position, ie the start mark on the handle is aligned with the arm mark.
(8) When the engine is cold, pull out the choke lever to increase the concentration of the combustible mixture and make the engine easier to start.
(9) After the handle is started by hand, the claw of the starter is engaged with the flywheel, and the start rope is quickly pulled out to start the engine.
(10) After the engine is started, the engine should be warmed up for 2 to 3 minutes at an idle speed, and then the choke levers are all pushed to the initial position.
(11) After the engine is started, it should be noted that the cooling water is steadily flowing out. If there is no water or intermittent water, the reason should be stopped.
(12) During the driving, the flameout rope should be hung on the wrist or belt to ensure the safety of the boat.
Note: The outboard motor has been run-in and commissioned for 4 hours before leaving the factory. The four-stroke outboard oil tank can only be filled with pure gasoline. The oil tank should use four-stroke special oil. The oil should be filled according to the scale on the oil scale. Check if the oil is sufficient before using the machine.
Specifications:
Item Name: Outboard Motors
Material: Metal + Plastic
Engine Model: four strokes 4 horsepower
Displacement: 55cc
Transmission Ratio: 2.08 (27:13)
Number of Cylinders: 1
Maximum Power: 2.9kw
Maximum Speed: 4500-5500r/min
Shift Position: clutch
Ignition System: CDI
Cooling System: wind cooling
Control System: tiller control
Startup Mode: manual start
Refueling Method: recommended 92# unleaded gasoline
Cylinder Diameter * Stroke: 44 * 33
Propeller Specifications: 3-7 1/4"*5"
Recommended Oil: four-stroke engine oil
Inclined Tilt System: manual tilt
Standard Fuel Tank Capacity: 1.4L
Adaptation Stem Board Height: 440mm
Product Weight: 10300g
Product Dimensions: 36.5 x 22 x 92cm
Package Weight: 13400g
Package Dimensions: 95 x 42 x 29cm
Packing: Carton Box
Package Content:
1 x Outboard Motors
1 x funnel
1 x kit
1 x cotter pin
Questions about Shipment Q1 : Do you ship worldwide?A1 : Yes, we can ship worldwide.
Q2 : Where you ship goods from?A2 : Our warehouse is located in China, the goods will be shipped from China mainland.
Q3 : What is the shipping cost?A3 : For giving customer good shopping experience, we offer free international shipment.
Q4 : What is the shipping time?A4 : For expected delivery date, please check in this page: Expected Delivery TimeQ5 : How do I track my package?A5 :You can track your order on 17track.net . Or if you need a team members help check up please contact with our service team service@enginediy.com and we will be in touch with a status update.
Questions about Payment & OrderQ1 : What payment terms you can accept?A1 : For payment, we accept Paypal and Credit Card.
Q2 : My payment was declined, why? How to solve it ?A2 : If you made the purchase via Credit Card and failed, could you please contact with Stripe Support Team for solution? Or if the issue can be solved, please no worry, we accept Paypal payment as well.
Q3 : How do I cancel my order?A3 : For the order, if not shipped out yet, please contact with our Service Support Team service@enginediy.com , we will cancel your order and give you full refund.
Q4 : Is my information is securing using this site?A4 : Yes, Enginediy.com takes precautions to protect your personal information. When you submit sensitive information via the website, your information is protected both online and offline. Please don’t worry for this.
Q5 : What if my address is wrong?A5 : If the recipient's address was wrong, after the failed delivery, the parcel should be returned back to sender. After we receive the parcel, we will contact you for an updated address and arrange the new shipment.
Questions about Return & RefundsQ1 : What items are returnable?A1 : a)- We can accept returns or exchanges within the 30-day period. b)- All returned items must be in the original condition: unused, unwashed, and unworn. No exceptions.
Q2 : How do I return a product?A2:Contact with Enginediy Service Team service@enginediy.com to confirm details to make sure the item is meet the return condition. After the agreement, Service Team will send the detailed return information, please offer return tracking number after return shipment.Q3 : What is you refund policy?A3 : Refunds are processed within 1-5 business days, after you received our confirmation on the cancellation.
Q4 :How will you refund me?A4 : The refund are applied to the original payment method.
