RETROL Full Metal Beam Engine Steam Engine Model Kit with Horizontal Boiler with Centrifugal Regulator Flyball
$299.99

Easter Holidays Deals-15% Off, $254.99 ONLY!

Join Our FacebookGroup & Get Extra Discount!

Build Your Own MOC Engine Bricks & Save Up to $200 OFF!

In Stock - Ready to Ship!

SKU 33ED3487709

1. Free Shipping Of All /Return guarantee /Payment secure.

2. Please contact us for Wholesale.

  • American Express
  • Apple Pay
  • Mastercard
  • PayPal
  • Visa

Customer Reviews

Based on 18 reviews
89%
(16)
11%
(2)
0%
(0)
0%
(0)
0%
(0)
E
Erik Speyer (Santa Fe, US)
Problem

I assembled the kit successfully, but I can't make the steam engine work. I got steam OK with enough pressure to have steam escaping from the condensate drain, But I can't make the pressure push the piston up. The flywheel turns freely and smoothly.. Help?

C
Charles (Chicago, US)
Little engine that could

The engine is running very good, grain alcohol seems to be the hottest burning fuel. I get about a 10 minute run time, a steam pressure gauge that screws into the water fill would make monitoring pressure easy and be the finishing touch.

I
Irek. M (Willmar, US)
Update

October 13 ,2023 Retrol Beam Steam Engine Update.
Today decided to run the engine first time on steam. Preheated distilled water before placing it in the boiler. Filled fuel container to the max. Placed water inside the boiler making sure that there is plenty room for the steam, ignited burner and placed it under the boiler waited until the water got hot to make steam. Noticed leakage of pressure/steam around and trough the whistle no matter of adjustment I was unable to stop the leak. Opened the valve on the boiler to allow the steam flow to the engine. Engine would not run I believe that was due to the steam pressure loss and not being able to produce steam quick enough in order to maintain proper minim pressure to ran the engine. Took the whistle apart and plugged the hole disabling any flow of steam trough it, no difference it leaked on the sides of the body. Burned the entire amount of the fuel in the burner , tried to adjust steam flow with the valve and nothing engine did not turn at all . I believe that was due to insufficient pressure and to the leaks. While cleaning the engine a small exhaust pipe on the engine piston body came off it. Looks like this pipe was just pressed in the hole on the body and now it would not stay in it. I join it with solder in place. Well in previous review I rated this engine 4 stars that was when I ran it on a compressed air it ran very good. Compressor can produce steady flow of minimum compressed air pressure required to ran the engine even with a small leaks. Steam can not be replaced as quickly to maintain that same constant pressure flow in the engine. After running it I cleaned it , while cleaning it a small exhaust pipe on the engine piston body came off it. Looks like this pipe was just pressed in the hole on the body and now it would not stay in it. I join it with solder in place. I test run the engine on compressed air and it runs good on air only.
Rating this engine for operation under the steam power I will give 0 stars. I am disappointed that it does not run as it should on steam , that is why it is called STEAM ENGINE.. If you plan running it on steam only, well you are on your own.

S
Steve (Lithonia, US)
Beam steam engine

I am a machinist and very impressed with the quality and tolerances of this engine. It's great fun too.

H
HERB SPLETZER (Comins, US)
Review of beam steam engine

The engine arrived well packed. On inspection, all parts were packed so that there was no chance of interference with the others. Kit was well made with attention to finish. On assembly, after lubing the engine pivot points I tried to run the engine on steam: was not successful. Will look again at assemby to ensure no friction in moving parts. found the steam
tube going to the flyball govenor block was slightly pinched because of hole placement in base, will disconnect tie rod to beam from crankshaft to make sure no tightness in piston is there.
Whistle blows, though . . .

Customer Reviews

Based on 18 reviews
89%
(16)
11%
(2)
0%
(0)
0%
(0)
0%
(0)
E
Erik Speyer (Santa Fe, US)
Problem

I assembled the kit successfully, but I can't make the steam engine work. I got steam OK with enough pressure to have steam escaping from the condensate drain, But I can't make the pressure push the piston up. The flywheel turns freely and smoothly.. Help?

C
Charles (Chicago, US)
Little engine that could

The engine is running very good, grain alcohol seems to be the hottest burning fuel. I get about a 10 minute run time, a steam pressure gauge that screws into the water fill would make monitoring pressure easy and be the finishing touch.

I
Irek. M (Willmar, US)
Update

October 13 ,2023 Retrol Beam Steam Engine Update.
Today decided to run the engine first time on steam. Preheated distilled water before placing it in the boiler. Filled fuel container to the max. Placed water inside the boiler making sure that there is plenty room for the steam, ignited burner and placed it under the boiler waited until the water got hot to make steam. Noticed leakage of pressure/steam around and trough the whistle no matter of adjustment I was unable to stop the leak. Opened the valve on the boiler to allow the steam flow to the engine. Engine would not run I believe that was due to the steam pressure loss and not being able to produce steam quick enough in order to maintain proper minim pressure to ran the engine. Took the whistle apart and plugged the hole disabling any flow of steam trough it, no difference it leaked on the sides of the body. Burned the entire amount of the fuel in the burner , tried to adjust steam flow with the valve and nothing engine did not turn at all . I believe that was due to insufficient pressure and to the leaks. While cleaning the engine a small exhaust pipe on the engine piston body came off it. Looks like this pipe was just pressed in the hole on the body and now it would not stay in it. I join it with solder in place. Well in previous review I rated this engine 4 stars that was when I ran it on a compressed air it ran very good. Compressor can produce steady flow of minimum compressed air pressure required to ran the engine even with a small leaks. Steam can not be replaced as quickly to maintain that same constant pressure flow in the engine. After running it I cleaned it , while cleaning it a small exhaust pipe on the engine piston body came off it. Looks like this pipe was just pressed in the hole on the body and now it would not stay in it. I join it with solder in place. I test run the engine on compressed air and it runs good on air only.
Rating this engine for operation under the steam power I will give 0 stars. I am disappointed that it does not run as it should on steam , that is why it is called STEAM ENGINE.. If you plan running it on steam only, well you are on your own.

S
Steve (Lithonia, US)
Beam steam engine

I am a machinist and very impressed with the quality and tolerances of this engine. It's great fun too.

H
HERB SPLETZER (Comins, US)
Review of beam steam engine

The engine arrived well packed. On inspection, all parts were packed so that there was no chance of interference with the others. Kit was well made with attention to finish. On assembly, after lubing the engine pivot points I tried to run the engine on steam: was not successful. Will look again at assemby to ensure no friction in moving parts. found the steam
tube going to the flyball govenor block was slightly pinched because of hole placement in base, will disconnect tie rod to beam from crankshaft to make sure no tightness in piston is there.
Whistle blows, though . . .