DLE Engines DLE 20CC Gas RC Aircraft Engine for RC Plane with Electronic Ignition and Muffler
The DLE-20 Gas Engine includes a beam mount for fast, easy installation. A rear pumper carb simplifies installation and adjustment. A generous package of "extras" and electronic ignition for starting ease make the DLE-20 an attractive, affordable option with the power to really move your Radio-Control aircraft. Flies on a 30 to 1 gas to 2-cycle engine oil mixture and delivers 2.5 horsepower at 9,000 rpm. Total engine weight is less than two pounds - perfect power for larger planes at minimum weight.
SPECIFICATIONS Output Power: 2.5 HP at 9,000 RPM Idle Speed: 1,750 RPM Static Thrust: 6 kg Pulling Force/100 meters altitude . 5.3 kg Pulling Force/1,800 meters altitude Displacement: 1.22cu in (20cc) Bore and Stroke: 1.3 x 1.0" (32 x 25mm) Compression Ratio: 10.5:1 Weight: Engine: 22.93oz.(650g) Exhaust: 1.76oz (50g) Ignition: 4.23oz (120g) Total: 28.9oz (820g) Gasoline/Oil Mixture: 30:1 Gasoline Octane Rating: 87-93 Recommended Propellers: 14x10, 15x8, 16x6, 16x8, 17x6, 18x6 (break-in prop not specified) Ignition Battery: 4.8V min,max as marked on electronic ignition unit. If marked 6V max, BEC required if LiPo battery used. Newer ones may be marked 4.8V to 8.4V. Replacement Spark Plug: CM3, DLEG2126 Spark Plug Gap: 0.018 - 0.020" Plug Installation Torque: 7 - 8ft-lbs, Carburetor Adjustments; Low Speed Needle: 1.5 turns out as a starting point, adjust for a smooth idle and a reliable transition to high throttle High Speed Needle: 1.5-2 turns out from closed, adjust needle to peak RPM, if engine slows or dies at full throttle, the high-speed mixture is likely too lean Height from bottom/Crankcase to top of Cylinder Head: 5.4" (138mm) Height/bottom/of Mounting Tab to top of Cylinder Head: 3.4" (87.5mm) Width of Cylinder Head: 2.5" (65mm) Width at Mounting Tabs: 2.8" (70.5mm) Distance/Mounting Hole Centers Same Side: 1.0" (26mm) Distance/Mounting Hole Centers Opposite Side: 2.4" (60mm) Height of Exhaust Opening: 0.42" (10.8mm) Width of Exhaust Opening: 0.83" (21mm) Length from Carburetor to Front Bearing: 4.5" (114mm) Length from Carburetor to Prop Hub: 5.1" (130mm) Total Height of Muffler including Exhaust Pipe: 3.8" (96mm) Center of Muffler Exhaust Opening to end of Pipe: 2.4" (61mm) Muffler Width: 2" (52.1mm) Exhaust Pipe Inner Diameter: 0.56" (14.2mm) Crankshaft thread size: 8mm x 1mm
REQUIREMENTS * Gasoline with at least 87 octane rating * 2-cycle oil, mix ratio for this engine is 30 parts gas to one part oil and must be followed exactly for warranty consideration and optimum performance * 4.8 - 6V NiMH/NiCd, or 6.6V LiFe or 7.4V LiPo battery for ignition (separate receiver style pack can be used)
NOTE : 1st version ignition is marked 'A-01' on the label and requires a regulator if using 2S LiPo/LiFe battery. If ignition module is the A-02 model it has a built-in voltage regulator. Model A-02 designation is located above the word "Ignition" on top of the case**
FEATURES * Two sealed bearings on crankshaft-simple design for lighter weight * Beam mounting allows easy fit in the same mount as comparable glow engines * Aluminum alloy crankcase with advanced CNC machining * Rear mounted pumper carburetor ensures easier installation and smooth idling and dependable fuel flow during flights * Fully automatic electronic ignition
Liquid error (snippets/product line 919): Could not find asset snippets/mett-Promotion.liquid
Questions about Shipment
Q1 : Do you ship worldwide? A1 : Yes, we can ship worldwide. Q2 : Where you ship goods from? A2 : Our warehouse is located in China, the goods will be shipped from China mainland.
Q3 : What is the shipping cost? A3 : For giving customer good shopping experience, we offer free international shipment.
Q4 : What is the shipping time? A4 : For expected delivery date, please check in this page: Expected Delivery Time
Q5 : How do I track my package? A5 :You can track your order on 17track.net . Or if you need a team members help check up please contact with our service team service@enginediy.com and we will be in touch with a status update.
Questions about Payment & Order Q1 : What payment terms you can accept? A1 : For payment, we accept Paypal and Credit Card.
Q2 : My payment was declined, why? How to solve it ? A2 : If you made the purchase via Credit Card and failed, could you please contact with Stripe Support Team for solution? Or if the issue can be solved, please no worry, we accept Paypal payment as well.
Q3 : How do I cancel my order? A3 : For the order, if not shipped out yet, please contact with our Service Support Team service@enginediy.com , we will cancel your order and give you full refund.
Q4 : Is my information is securing using this site? A4 : Yes, Enginediy.com takes precautions to protect your personal information. When you submit sensitive information via the website, your information is protected both online and offline. Please don’t worry for this.
Q5 : What if my address is wrong? A5 : If the recipient's address was wrong, after the failed delivery, the parcel should be returned back to sender. After we receive the parcel, we will contact you for an updated address and arrange the new shipment.
Questions about Return & Refunds Q1 : What items are returnable? A1 : a)- We can accept returns or exchanges within the 30-day period. b)- All returned items must be in the original condition: unused, unwashed, and unworn. No exceptions. Q2 : How do I return a product? A2:Contact with Enginediy Service Team service@enginediy.com to confirm details to make sure the item is meet the return condition. After the agreement, Service Team will send the detailed return information, please offer return tracking number after return shipment. Q3 : What is you refund policy? A3 : Refunds are processed within 1-5 business days, after you received our confirmation on the cancellation.
Q4 :How will you refund me? A4 : The refund are applied to the original payment method.
