Hit and Miss Engine Full Metal IC Engine Model Water Cooled Gasoline Engine Internal Combustion Engine with Base Gift Collection
What's Hit and Miss Engine?
A hit-and-miss engine is a type of four-stroke internal combustion engine that is controlled by a governor to operate at a set speed. It was conceived in the late 19th century and produced by various companies from the 1890s through approximately the 1940s. The name comes from the speed control on these engines: they fire ("hit") only when operating at or below a set speed, and cycle without firing ("miss") when they exceed their set speed. This is as compared to the "throttle governed" method of speed control. The sound made when the engine is running without a load is a distinctive "POP whoosh whoosh whoosh whoosh POP" as the engine fires and then coasts until the speed decreases and it fires again to maintain its average speed.
Features: 1. STABLE STRUCTURE: The engine can be disassembled and can be used for DIY , the structure design is stable, and the surface has anti-rust treatment. 2. SIMPLE OPERATION: Place the engine on a lug boss, leave the wheel in a suspended state, inject gasoline or diesel or kerosene into the single cylinder, and then manually rotate the wheel (may take two or three attempts) and the engine will start. It is very convenient to observe the principle of the engine. 3. PRIORITY GIFT OPTION FOR MANY APPLICATIONS: The engine has a wide range of application as, great gift for teacher’s Demo props on the class, birthday gift for friends, families, parents, etc. or can be used as home or office ornaments.
Starting Steps: 1. Check the engine wiring, connect the oil tank and pipeline when install the battery (ignition voltage: 6-7.4V). 2. Fill the tank with 95# gasoline. Make sure the minimum oil level of the fuel pipe is not lower then that of the carburetor when fixing the fuel tank. 3. Check whether the screws on the model are loose and whether the throttle is closed. Add about 3/4 cold water to the tank after inspection. 4. Turn on the power switch and turn the flywheel. Start the engine counterclockwise on the right side of the engine.
Warm Tips: 1. Squeeze the air to fill the pipeline with fuel if there is air in the pipeline. 2. Please be careful not to press the accelerator too high before starting. Adjust the accelerator properly to make the model run smoothly after starting. 3. Add 2-3 drops of oil at the carburetor and adjust the accelerator properly if the start is not smooth.
Applicable: This is a elaborated internal combustion engine model which is convenient to operate and evokes immersive fun. Its vintage outlook is suitable for model fans to collect and makes ideal gift for holidays.
Description: Item Name: Full Metal Combustion Engines Weight: About 2kg Material: Aluminium Alloy Voltage: 6~7.4V Fuel: Kerosene or Gasoline The best tappet clearance: 0.5mm Age: Kids over 10 years old
Packaga Included: 1 × Full Metal Hit and Miss Engine
Liquid error (snippets/product line 792): Could not find asset snippets/mett-Promotion.liquid
Questions about Shipment
Q1 : Do you ship worldwide? A1 : Yes, we can ship worldwide. Q2 : Where you ship goods from? A2 : Our warehouse is located in China, the goods will be shipped from China mainland.
Q3 : What is the shipping cost? A3 : For giving customer good shopping experience, we offer free international shipment.
Q4 : What is the shipping time? A4 : For expected delivery date, please check in this page: Expected Delivery Time
Q5 : How do I track my package? A5 :You can track your order on 17track.net . Or if you need a team members help check up please contact with our service team email@example.com and we will be in touch with a status update.
Questions about Payment & Order Q1 : What payment terms you can accept? A1 : For payment, we accept Paypal and Credit Card.
Q2 : My payment was declined, why? How to solve it ? A2 : If you made the purchase via Credit Card and failed, could you please contact with Stripe Support Team for solution? Or if the issue can be solved, please no worry, we accept Paypal payment as well.
Q3 : How do I cancel my order? A3 : For the order, if not shipped out yet, please contact with our Service Support Team firstname.lastname@example.org , we will cancel your order and give you full refund.
Q4 : Is my information is securing using this site? A4 : Yes, Enginediy.com takes precautions to protect your personal information. When you submit sensitive information via the website, your information is protected both online and offline. Please don’t worry for this.
Q5 : What if my address is wrong? A5 : If the recipient's address was wrong, after the failed delivery, the parcel should be returned back to sender. After we receive the parcel, we will contact you for an updated address and arrange the new shipment.
Questions about Return & Refunds Q1 : What items are returnable? A1 : a)- We can accept returns or exchanges within the 30-day period. b)- All returned items must be in the original condition: unused, unwashed, and unworn. No exceptions. Q2 : How do I return a product? A2:Contact with Enginediy Service Team email@example.com to confirm details to make sure the item is meet the return condition. After the agreement, Service Team will send the detailed return information, please offer return tracking number after return shipment. Q3 : What is you refund policy? A3 : Refunds are processed within 1-5 business days, after you received our confirmation on the cancellation.
Q4 :How will you refund me? A4 : The refund are applied to the original payment method.