Outboard Motors, 4 Stroke 7.5Hp 196cc Air-cooled Boat Engine Outboard Boat Motor
Features:
1, High Performance: Four-stroke power, less noise, fuel saving. Started by hand, simple and convenient. With reverse function for operation flexibly.
2, Applicable Ship: 7.5hp outboard is suitable for small boats of various materials (such as inflatable boat, iron boat, plastic boat, glass fiber reinforced plastic boat, wooden boat, etc.) of 3-7m.
3, Driving: When the built-in tank is filled with primary fuel and running at full speed, it can normally run for about 1.5 hours with a speed of 20-22km/h (due to different ship type, load and natural conditions, the speed will vary as well).
4, Fuel Condition: Gasoline and oil of the four-stroke outboard need to be filled separately. The gasoline used is 92# and above pure gasoline, and the machine oil used is special four-stroke machine oil
Attention: When add sufficient amount of gasoline and appropriate amount of machine oil (the amount of machine oil is subject to the scale line). Close the throttle (1 means close, 4 means open), and adjust the throttle to the lowest (L is the lowest, H is the highest). Start the electric start switch or pull the start disc to open the engine and open the damper to the maximum. During the operation of the engine, the damper is fully opened and the throttle handle is controlled for speed adjustment.
Notes: After receiving the four-stroke outboard, please add meh-cine oil and gasoline by yourself. Gasoline and machine oil must be filled separately. Close the air door when cooling machine, and open the air door after starting the engine. Do not close the damper when the machine is running, otherwise it will turn off. Using the machine with the damper closed for a long time will cause flooding. In case of flooded cylinder, the spark plug should be removed. The machine should be upside down for 1-2 days and then reused. If you do not use the engine for more than half a month, please empty the fuel ahead of time, otherwise the gasoline will block the oil road after deterioration, resulting in startup difficulties. Check the engine oil after the first 5 hours of use, and check the oil and air filter before each use after the first use. When the machine is stored and transported, the engine must be placed horizontally to avoid fuel and oil leakage.
Specifications:
Item Name: Outboard Motors
Material: Metal + Plastic
Shaft Type: Long Shaft (Applicable to stern plate within 57cm from water surface)
Displacement: 196cc
Control System: Steering Handle
Gear: No Gearshift (Reverse / Forward / Neutral)
Fuel Tank Capacity: 1.3L
Cooling System: Air Cooling
Propeller Specification: Diameter: 20cm, 3-blade aluminum
Power: 4 stroke, 7.5 horsepower
Speed: 3800 Revolution
Ignition System: CDI
Start Mode: By Hand or Electrical Starting
Tilt System: Manual Tilt
Carburetor: Diaphragm Type
Fuel Oil: 92# and above Pure Gasoline
Product Weight: 27000g
Package Dimensions: 134 x 54 x 42cm
Package Weight: 28000g
Packing: Box
Package Content:
1 x Outboard Motors
Questions about Shipment Q1 : Do you ship worldwide?A1 : Yes, we can ship worldwide.
Q2 : Where you ship goods from?A2 : Our warehouse is located in China, the goods will be shipped from China mainland.
Q3 : What is the shipping cost?A3 : For giving customer good shopping experience, we offer free international shipment.
Q4 : What is the shipping time?A4 : For expected delivery date, please check in this page: Expected Delivery TimeQ5 : How do I track my package?A5 :You can track your order on 17track.net . Or if you need a team members help check up please contact with our service team service@enginediy.com and we will be in touch with a status update.
Questions about Payment & OrderQ1 : What payment terms you can accept?A1 : For payment, we accept Paypal and Credit Card.
Q2 : My payment was declined, why? How to solve it ?A2 : If you made the purchase via Credit Card and failed, could you please contact with Stripe Support Team for solution? Or if the issue can be solved, please no worry, we accept Paypal payment as well.
Q3 : How do I cancel my order?A3 : For the order, if not shipped out yet, please contact with our Service Support Team service@enginediy.com , we will cancel your order and give you full refund.
Q4 : Is my information is securing using this site?A4 : Yes, Enginediy.com takes precautions to protect your personal information. When you submit sensitive information via the website, your information is protected both online and offline. Please don’t worry for this.
Q5 : What if my address is wrong?A5 : If the recipient's address was wrong, after the failed delivery, the parcel should be returned back to sender. After we receive the parcel, we will contact you for an updated address and arrange the new shipment.
Questions about Return & RefundsQ1 : What items are returnable?A1 : a)- We can accept returns or exchanges within the 30-day period. b)- All returned items must be in the original condition: unused, unwashed, and unworn. No exceptions.
Q2 : How do I return a product?A2:Contact with Enginediy Service Team service@enginediy.com to confirm details to make sure the item is meet the return condition. After the agreement, Service Team will send the detailed return information, please offer return tracking number after return shipment.Q3 : What is you refund policy?A3 : Refunds are processed within 1-5 business days, after you received our confirmation on the cancellation.
Q4 :How will you refund me?A4 : The refund are applied to the original payment method.
