HOLIDAY DEALS: Get Extra 12% Off with Coupon Code: HD12
Join Our FacebookGroup & Get Extra Discount!
Build Your Own MOC Engine Bricks & Save Up to $200 OFF!
HOLIDAY DEALS: Get Extra 12% Off with Coupon Code: HD12
Join Our FacebookGroup & Get Extra Discount!
Build Your Own MOC Engine Bricks & Save Up to $200 OFF!
HG P802 1:12 2.4G RC Militray Truck 8x8 Remote Control Truck Model Heavy-duty Wheeled All Terrin Truck Kit
Features:
.All-terrain multi-purpose heavy-duty wheeled military truck, with high-simulation appearance
.2.4G four-channel automatic frequency-matching full-scale synchronous remote control system
.Two 15kg copper tooth digital steering gear(high power steering)
.Steering steering independent 15A regulated power supply mode
.Central transmission secondary mechanical gear position adjustable (remote adjustable)
.The chassis structure of the whole vehicle adopts zinc alloy material
.The front and rear axles adopt the bevel gear straight tooth high-load reduction transmission structure.
.Spring steel plate shock absorber + telescopic double shock absorption
.Variable stroke CVD ball type universal joint shaft
.Front and rear independent connecting rod suspension system
.The back panel of the rear bucket can be fully opened
.The aluminum alloy of the bucket bottom plate
.8*8/8 wheel full-time drive, 550 large torque motor (3660 brushless motor) using the planetary tooth drive structure
.1:12 full-scale high simulation model, 320A independent electronic governor / 60A brushless ESC
.Light and sound combinations can be upgraded under any platform modification
.The first 4 rounds adopt wire rope pulling structure to realize four-wheel synchronous steering
.Tips: This set does not contain battery and charger, please buy them yourself. The trucks are available in desert yellow and olive drab. Trucks can also be upgraded with a combination of lighting and sound simulation (available at this store)
.For Age: 14+
Specifications:
.Color: Olive Drab
.Material: Hardware + Zinc Alloys + Plastics + Electronic Components
.Motor: 550-class high torque brush motor / 3660 brushless motor
.Governor: 320A independent electronic governor / 60A brushless ESC
.Wheelbase: 128mm x 258mm x 128mm
.Wheel Margin: 218.5mm
.Wheel Diameter: R111mm
.Frequency: 2.4G Hz
.Remote Control Category: Full Scale Synchronous Control System (Blaster Control) Four Channels
.Remote Control Distance: about 80 meters
.Remote Control Time: 20 Minutes (Brush with low speed test) / 30 minutes (brushless)
.Speed: 12km/h (Low Speed), 18km/h (High Speed)
.Truck Battery: 2S 7.4V 3000mAh High Power Lithium Battery T Plug Recommended (Not Included)
.Remote Control Battery: 4 x 1.5V AA Battery (Not Included)
.Charger: Charger (Not Included)
.Protection Function: Low Voltage Alarm / High Temperature Power Failure Protection / 15A Voltage Regulator
.Maximum Climbing Angle: 35°(Low Speed) / 15° (High Speed)
.Maximum Wading Depth: 55mm
.Maximum Load Capacity: 10kg
.Minimum Turning Radius: About 1m
.Maximum Groove Width: 180mm
.Product Dimensions: 73.95 x 21.85 x 24.25cm
.Product Weight: 11400g
.Package Dimensions: 78 x 30 x 28cm
.Package Weight: 13500g
.Packing: Graphic Carton
Package Content:
.1Set x Truck Model
.1 x Remote Control
.1 x User Guide
Got the p801 on time . Did a 10min run little moun of dirt hill would go up it had no traction. Back in shop found 3 out of 4 front shocks upper bracket was broken. The upper brackets are moulded in frame and is all pot metal. IT may have been they did not put a long enough screw to go into main part of bracket ???. You wood have to replaces the hole frame to fix it bad design. The screws only went to the end of bathe spacer as you can see in pictures. You can pay a new frame $46.00 I am going to install a metal shock brackets all 4. IT not a crawler as you tub shows. You need to lock up the back axles. I am doing this and changing motor and lowing gears for towing about 100-120lb. Have been working with other person {sales}? NO all a bough it. A real metal frame better adds did not get right metal spec.. thang garry naccarato hope this help
Got the p801 on time . Did a 10min run little moun of dirt hill would go up it had no traction. Back in shop found 3 out of 4 front shocks upper bracket was broken. The upper brackets are moulded in frame and is all pot metal. IT may have been they did not put a long enough screw to go into main part of bracket ???. You wood have to replaces the hole frame to fix it bad design. The screws only went to the end of bathe spacer as you can see in pictures. You can pay a new frame $46.00 I am going to install a metal shock brackets all 4. IT not a crawler as you tub shows. You need to lock up the back axles. I am doing this and changing motor and lowing gears for towing about 100-120lb. Have been working with other person {sales}? NO all a bough it. A real metal frame better adds did not get right metal spec.. thang garry naccarato hope this help
Be the First to See Our New Products and Special Offers.
Copyright © 2023 EngineDIY.